A lovely addition for your water butt. This classic brass tap has a 3/4" BSP thread and can screw straight into your water butt.
This tap works with our 50, 120, 240 and 350 litre wood effect water butts and is supplied with a roll of PTFE thread seal tape. Please note: this tap is not supplied with a back nut so check if this will work for your water butt.
When fitting the tap be carefull not to cross thread the threads in the barrel. First of all add some PTFE to the tap thread, line the tap up with the hole in your water butt to make sure it will screw in straight, and screw in.. You could also add a washer to the tap, just take the washer off the tap which has been supplied with your water butt, add to the brass tap, add the PTFE tape and screw in.
If you would like a high quality 3/4" BSP brass tap for your water butt, this would be perfect.
Size: 3/4" BSP (26.44mm)